Our company is renowned as one of the prime Gang Drilling Machine Manufacturers & Exporters from India. These machines are used for multi spindle drilling of holes From both side of job or single side on various products as per customer`s requirements and drawings. The Gang Drilling Machines, offered by us, are available in different sizes of lengths and different number of drilling holes. The machines can be provided with automatic pneumatically powered end locators, 180 rotations and for loading of pipes.
Model No. | HD 14 D |
Minimum tube diameter | 35mm |
Maximum tube diameter | 90mm |
Maximum length of tube | 3000 |
Material of tube | Mild Steel |
Location of tube | Hardened V-Blocks |
Feed | Hydraulically Powered |
Max number of drills | 10/12/14/16/17/18 |
Drilling force | Up to 25000 Kg |
Tube loading | Manual |
Tube Ejection | Manual |
Pitch between drills | 80/ 100/ 125/ 150 |
Position of first drilled hole | As per customer |
Collet for drill holding | E-40 (Schaublin Type) |
Size of drills | 8-25 |
Hydraulic power pack motor | 3.5 H.P. @ 1 NOS. |
Main drive motor with inventor | 3H.P. Four Nos. |
Coolant tank with pump | Self contained |
Tube clamping | Hydraulically |
Control system | PLC |
Cycle time (Drilling Only) | 12 Seconds |
Total cycle time | 20-25 Seconds |
Change over time (Without drill change) | 10 Minutes For Width of Holes |
Change over time (With drill change) | 25 Minutes For All |
To be changed when drill size needs to be changed